| POSSIBLE CAUSE |
- DSC HU/CM malfunction
- Brake fluid level is low
- Brake fluid level sensor malfunction
- Parking brake switch malfunction
- Short to ground in wiring harness between brake fluid level sensor and BCM terminal 1N
- Short to ground in wiring harness between parking brake switch and BCM terminal 2Q
- Instrument cluster malfunction
- Connector or pin malfunction
- Short circuit in wiring harness between CAN-L, CAN-H and ground
- Open circuit in CAN wiring harness (CAN-L, CAN-H)
- CAN wiring harness (CAN-L, CAN-H) short each other
- Malfunction in brake switch signal input to PCM (PCM stores DTC P0571:00 and/or P0703:00.)(without malfunction warning light)
|