LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> On-Board Diagnostic [Hands-Free Telephone System) >> CLEARING DTC [Bluetooth SYSTEM (HANDS-FREE TELEPHONE SYSTEM)] >> Without Using M-MDS (On-board Diagnostic Test Mode)

Without Using M-MDS (On-board Diagnostic Test Mode)

  1. Launch the on-board diagnostic test mode. (See DTC INSPECTION [BLUETOOTH SYSTEM (HANDS-FREE TELEPHONE SYSTEM)] .)
  2. While pressing the AUTO-M button, simultaneously press the PRESET 4 button for 2 s or more  .
    Fig 1: Identifying Preset 4 And Auto-M Buttons
    G08152596
  3. Switch the ignition OFF (LOCK) to stop the on-board diagnostic test mode.
scientia non olet · About LEMON Manuals