LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> On-Board Diagnostic [Hands-Free Telephone System) >> CLEARING DTC [Bluetooth SYSTEM (HANDS-FREE TELEPHONE SYSTEM)] >> Using the M-MDS >> ODDTC memory clearing procedure

ODDTC memory clearing procedure

  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "ACU".
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Switch the ignition OFF (LOCK).
  6. Switch the ignition ON and wait for 5 s or more  .
  7. Perform DTC inspection. (See DTC INSPECTION [BLUETOOTH SYSTEM (HANDS-FREE TELEPHONE SYSTEM)] .)
  8. Verify that no DTCs are displayed.
scientia non olet · About LEMON Manuals