LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> CX-9 FWD V6-3.7L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Cross-Member >> Front Cross-Member >> Service and Repair >> Front Suspension - Transverse Member Removal/Installation

Front Suspension - Transverse Member Removal/Installation





TRANSVERSE MEMBER REMOVAL/INSTALLATION

1. Remove the transverse member.






2. Install the transverse member with the identification mark facing the rear right of the vehicle.






scientia non olet · About LEMON Manuals