LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Conventional Brake System >> Brake Fluid Level Sensor Inspection

Brake Fluid Level Sensor Inspection

  1. Disconnect the negative battery cable.
  2. Disconnect the sensor connector.
  3. Inspect for continuity between terminals of fluid level sensor.
    • If not as specified, replace the fluid level sensor.
      Fig 1: Fluid Level Sensor Terminals Continuity Chart
      G08142485
scientia non olet · About LEMON Manuals