Cooling fan motor No. 2 does not operate
WARNING: This page is about a different variant/trim than selected.
- Inspect for followings:
- Open or short to ground circuit between fan control module and the cooling fan motor No. 2
- Poor connection of the fan control module connector or the cooling fan motor No. 2 connector
- Cooling fan motor No. 2 malfunction (See COOLING FAN MOTOR INSPECTION
.)
- If there is malfunction, repair or replace malfunctioning part.
- If there is no malfunction, replace the fan control module. (See COOLING FAN MOTOR REMOVAL/INSTALLATION .)