LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mazda
>>
2012
>>
6 i Touring
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 6 (Engine Cooling System [MZI 3.7 V6])
>>
Water Pump Removal/Installation
>>
Water Pump Installation Note
Water Pump Installation Note
WARNING:
This page is about a different variant/trim than selected.
Tighten the water pump bolts in the order shown in the figure.
Fig 1: Identifying Water Pump Bolt Tightening Sequence
Tightening torque
9-11 N.m {92-112 kgf.cm, 80-97 in.lbf}