LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Cooling System [MZI 3.7 V6]) >> Thermostat Removal/Installation >> O-ring Installation Note

O-ring Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Clean and inspect the O-ring.
    • Install a new O-ring if necessary.
  2. Apply clean engine coolant to the O-ring.
  3. Install the O-ring.
scientia non olet · About LEMON Manuals