LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Cooling System [MZI 3.7 V6]) >> Radiator Removal/Installation >> Radiator Removal Note

Radiator Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the four bolts which secure the condenser to the radiator and set the condenser apart from the radiator.
    Fig 1: Identifying Bolts Secure Condenser To Radiator
    G08140464
  2. Remove the radiator from above the engine compartment.