LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Cooling System [MZI 3.7 V6]) >> Radiator Removal/Installation >> Radiator Installation Note

Radiator Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Align the bracket groove of the condenser to the radiator positioning rib.
    Fig 1: Aligning Bracket Groove Of Condenser To Radiator Positioning Rib
    G08140465
  2. Align the bracket notch of the condenser to the radiator positioning rib.
    Fig 2: Aligning Bracket Notch Of Condenser To Radiator Positioning Rib
    G08140466
  3. Install the condenser installation bolts as shown in the figure.
    Fig 3: Identifying Condenser Installation Bolts
    G08140467
scientia non olet · About LEMON Manuals