LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical [Lubrication System MZI 3.7 V6]) >> Engine Oil Level Inspection

Engine Oil Level Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Position the vehicle on level ground.
  2. Warm up the engine.
  3. Stop the engine and allow at least 5 min  before continuing.
  4. Remove the dipstick, wipe it cleanly, and reinstall it fully.
  5. Remove the dipstick and verify that the oil level is between the F and L marks on the dipstick.
    Fig 1: Identifying Oil Level F And L Marks On Dipstick
    G08140408
    • If the oil level is below the L mark, add to raise the level within the hatching zone.
scientia non olet · About LEMON Manuals