Front Oil Seal Installation Note
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Apply clean engine oil to the front oil seal bore in the engine front cover.
- Push the front oil seal slightly in by hand.
- Tap the front oil seal in evenly using the SST
and a hammer.
Substitution SST
- 49 G028 203
Outer diameter: 58-70 mm {2.3-2.7 in}
Inner diameter: 56-58 mm {2.21-2.28 in}
Tube with board thickness 2 mm {0.08 in} or more
- 49 G028 203