LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical (Service Information MZI 3.7 V6)) >> Timing Chain Removal/Installation >> Cylinder Head Cover Oil Seal Removal Note

Cylinder Head Cover Oil Seal Removal Note

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Inspect the OCV attachment hole seal. Remove the any damaged seal.
  1. Tap the OCV attachment hole seal using the SSTs and hammer.
    Fig 1: Tapping OCV Attachment Hole Seal Using SSTs And Hammer
    G08140297
scientia non olet · About LEMON Manuals