LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical (Service Information MZI 3.7 V6)) >> Timing Chain Removal/Installation >> Cylinder Head Cover Oil Seal Installation Note

Cylinder Head Cover Oil Seal Installation Note

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Installation of new seal is only required if damaged seal were removed during disassembly of the engine.
  1. Push the OCV attachment hole seal slightly in by hand.
  2. Tap the OCV attachment hole seal using the SST  and hammer.
    Fig 1: Tapping OCV Attachment Hole Seal Using SST And Hammer
    G08140317
scientia non olet · About LEMON Manuals