Idle Speed Inspection
WARNING: This page is about a different variant/trim than selected.
- Perform "Engine Tune-up Preparation". (See ENGINE TUNE-UP PREPARATION .)NOTE:
- The idle speed cannot be adjusted.
- The M-MDS is required to verify the idle speed.
- Verify that the idle speed (M-MDS: RPM) is within the specification using M-MDS.
Idle speed (P position)
- No load: 570-670 rpm
- Electrical load on: 570-730 rpm
- Power steering oil pump operation: 600-700 rpm
- A/C and heater operation: 570-745 rpm