DTC P0463:00: Notes
WARNING: This page is about a different variant/trim than selected.
| DTC P0463:00 |
Fuel gauge sender unit circuit high input |
| DETECTION CONDITION |
- The PCM monitors the fuel level input communications network message for a concern. The test fails if the fuel level input signal is more than the maximum allowable calibrated parameter for a specified fuel-fill percentage in the fuel tank.
|
| POSSIBLE CAUSE |
- Fuel pump malfunction
- Incorrectly installed fuel gauge
- Instrument cluster malfunction
- Fuel level input signal circuit malfunction
- Overfilled fuel tank
- Fuel gauge malfunction
|