Diagnostic Procedure
WARNING: This page is about a different variant/trim than selected.
| STEP |
INSPECTION |
ACTION |
| 1 |
INSPECT ENGINE CONTROL SYSTEM FOR MALFUNCTION
|
Yes |
Go to No.24 "ENGINE STALLS WHEN SHIFTED TO D OR IN R POSITION". |
| No |
Repair or replace any malfunctioning parts according to the inspection results. |
| 2 |
- Verify test results.
- If normal, return to the diagnostic index to service any additional symptoms.
- If malfunction remains, inspect the related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis.
- If the vehicle is repaired, troubleshooting completed.
- If the vehicle is not repaired or additional diagnostic information is not available, replace the TCM.
|