No.11 Shift Point Is High Or Low
WARNING: This page is about a different variant/trim than selected.
| 11 |
Shift point is high or low |
| DESCRIPTION |
- Shift point considerably different from automatic shift diagram.
- Shift delays when accelerating.
- Shift occurs quickly when accelerating and engine speed does not increase.
|
| POSSIBLE CAUSE |
- If the transaxle does not shift abnormally, there is a malfunction of the input signal to the APP sensor, input/turbine speed sensor, or VSS.
- If the engine speed is high or low, regardless of normal shifting, inspect the tachometer.
- Verify that the output signals of the APP sensor change linearly.
NOTE:
- If a tire of a different diameter from the standard tire is installed, the TCM determines that the driving mode is the AAS mode, and may change to a different shift timing from the normal timing.
|