DTC P2762:00: Notes
WARNING: This page is about a different variant/trim than selected.
| DTC P2762:00 |
TCC control solenoid range/performance |
| DETECTION CONDITION |
- Conditions: TCM communication normal
- Circumstances: Inappropriate feedback current for solenoid current command value detected
- Time period: Determined after lasting 2 or more seconds
Diagnostic support note:
- The MIL illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- The AT warning light illuminates.
- PENDING CODE is not available.
- FREEZE FRAME DATA is available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
|
| POSSIBLE CAUSE |
- Deteriorated ATF
- ATF level low
- Line pressure malfunction
- Solenoid valve malfunction
- TCM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |