DTC P1919:00: Notes
WARNING: This page is about a different variant/trim than selected.
| DTC P1919:00 |
Engine coolant temperature signal error |
| DETECTION CONDITION |
- Conditions: TCM communication normal
- Circumstances: Engine coolant temperature signal abnormality detected
- Time period: Determined after 1 times
Diagnostic support note:
- The MIL does not illuminate.
- The AT warning light does not illuminate.
- PENDING CODE is not available.
- FREEZE FRAME DATA is available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits slip control
- Fixes the engine coolant temperature signal at 80 °C{176 °F}
|
| POSSIBLE CAUSE |
|
| SYSTEM WIRING DIAGRAM |
- |