DTC P1738:00: Notes
WARNING: This page is about a different variant/trim than selected.
| DTC P1738:00 |
Shift control solenoid component malfunction |
| DETECTION CONDITION |
- Conditions: ATF temperature -20 °C {68 °F} or more, TCM communication normal, driving in D position, output VSS rotation 300 rpm or more (wheel not spinning)
- Circumstances: Abnormal shifting detected
- Time period: Determined after 5 times
Diagnostic support note:
- The MIL does not illuminate.
- The AT warning light illuminates.
- PENDING CODE is not available.
- FREEZE FRAME DATA is available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits adaptive shift control
|
| POSSIBLE CAUSE |
- Deteriorated ATF
- ATF level low
- Line pressure malfunction
- Solenoid valve malfunction
- Line pressure control solenoid
- Shift solenoid A
- Shift solenoid B
- Shift solenoid C
- Shift solenoid D
- Shift solenoid E
- Shift solenoid F
- ATX malfunction
- Control valve body malfunction
- TCM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |