DTC P1719:00: Notes
WARNING: This page is about a different variant/trim than selected.
| DTC P1719:00 |
Engine torque signal error (inaccurate signal) |
| DETECTION CONDITION |
- Conditions: TCM communication normal
- Circumstances: Engine torque signal abnormality detected
- Time period: Determined after 275 times lasting 0.02 seconds
Diagnostic support note:
- The MIL does not illuminate.
- The AT warning light does not illuminate.
- PENDING CODE is not available.
- FREEZE FRAME DATA is available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits learning control
- Inhibits adaptive shift control
- Performs control with the engine torque value of 1.2
|
| POSSIBLE CAUSE |
|
| SYSTEM WIRING DIAGRAM |
- |