DTC P0702:00: Notes
WARNING: This page is about a different variant/trim than selected.
| DTC P0702:00 |
Linear solenoid driver electrical |
| DETECTION CONDITION |
- Conditions: TCM communication normal
- Circumstances: Inappropriate current for solenoid current command value detected
- Time period: Determined after 5 consecutive times lasting 0.08 or more seconds
Diagnostic support note:
- The MIL illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- The AT warning light illuminates.
- PENDING CODE is not available.
- FREEZE FRAME DATA is available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
|
| POSSIBLE CAUSE |
|
| SYSTEM WIRING DIAGRAM |
- |