DTC P0220:00: Notes
WARNING: This page is about a different variant/trim than selected.
| DTC P0220:00 |
Accelerator pedal position circuit |
| DETECTION CONDITION |
- Conditions: TCM communication normal
- Circumstances: Accelerator pedal position signal abnormality detected
- Time period: Determined after 1 times
Diagnostic support note:
- The MIL illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- The AT warning light illuminates.
- PENDING CODE is not available.
- FREEZE FRAME DATA is available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits learning control
- Inhibits TCC control
- Inhibits slip control
- Inhibits adaptive shift control
- Fixes the accelerator pedal position open signal at 18.8%
|
| POSSIBLE CAUSE |
|
| SYSTEM WIRING DIAGRAM |
- |