LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Emission System [MZI 3.7 V6]) >> Evaporative Chamber Inspection

Evaporative Chamber Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Remove the evaporative chamber. (See EVAPORATIVE CHAMBER REMOVAL/INSTALLATION .)
  2. Plug the port C.
    Fig 1: Evaporative Chamber Inspection Points
    G08140658
  3. Verify that there is air flow from port B when pressure is applied to port A.
  4. Remove the plug of port C.
  5. Plug the port B.
    Fig 2: Evaporative Chamber Inspection Points
    G08140659
  6. Verify that there is air flow from port C when pressure is applied to port A.
  7. Remove the plug of port B.
  8. Verify that there is air flow when vacuum is applied to port A.
    Fig 3: Identifying Evaporative Chamber
    G08140660
scientia non olet · About LEMON Manuals