DTC P060B:00 [L5]: Notes

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

DETECTION CONDITION & POSSIBLE CAUSES

DTC P060B:00	Internal control module A/D processing performance problem
DETECTION CONDITION	Indicates that an error occurred in the PCM. Diagnostic support note This is a continuous monitor (CCM). The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle. FREEZE FRAME DATA is available The DTC is stored in the PCM memory.
POSSIBLE CAUSE	PCM connector or terminal malfunction PCM malfunction

DTC P060B:00

Internal control module A/D processing performance problem

DETECTION CONDITION

Indicates that an error occurred in the PCM.

Diagnostic support note

This is a continuous monitor (CCM).
The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle.
FREEZE FRAME DATA is available
The DTC is stored in the PCM memory.

POSSIBLE CAUSE

PCM connector or terminal malfunction
PCM malfunction