DTC P060A:00, P060C:00, P061D:00 [L5]: Notes

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

DETECTION CONDITION & POSSIBLE CAUSES

DTC P060A:00	Internal control module monitoring processor performance problem
DTC P060C:00	Internal control module main processor performance problem
DTC P061D:00	Internal control module engine air mass performance problem
DETECTION CONDITION	Indicates an error occurred in the PCM. Diagnostic support note This is a continuous monitor (CCM) The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle. FREEZE FRAME DATA is available. The DTC is stored in the PCM memory
POSSIBLE CAUSE	PCM connector or terminal malfunction Software incompatibility issue PCM malfunction