LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 633 (On-Board Diagnostic (Engine Control System L5) (1 Of 5)) >> On-Board Diagnostic Test [L5] >> Freeze Frame PID Data Access Procedure

Freeze Frame PID Data Access Procedure

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
    2. Fig 1: Identifying DLC-2
    G06199564Courtesy of MAZDA MOTORS CORP.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Self Test".
      2. Select "Modules".
      3. Select "PCM"
    • When using the PDS (Pocket PC)
      1. Select "Module Tests".
      2. Select "PCM".
      3. Select "Self Test".
  3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the M-MDS screen.
  4. Retrieve the freeze frame PID data according to the directions on the M-MDS screen.
scientia non olet · About LEMON Manuals