DTC P061B:00 [MZI-3.7]: Notes

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

DETECTION CONDITION & POSSIBLE CAUSE

DTC P061B:00	Internal control module torque calculation performance
DETECTION CONDITION	Indicates that a calculation error occurred in the PCM.
POSSIBLE CAUSE	Connector or terminal malfunction NOTE: This DTC is an informational DTC and may be set in combination with a number of other DTCs which are causing the FMEM. Diagnose other DTCs first.