LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (Body System [Doors And Liftgate]) >> Rear Door Hole Cover Removal

Rear Door Hole Cover Removal

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Using a utility knife with bare hands can cause injury. Always wear gloves when using a utility knife.
  1. Remove the rear door trim. See REAR DOOR TRIM DISASSEMBLY/ASSEMBLY .
  2. Remove the sealant around the rear door hole cover using a utility knife.
  3. Remove the hole cover.
Fig 1: View Of Rear Door Hole Cover Removal
G06205703Courtesy of MAZDA MOTORS CORP.