DTC Table [Blind Spot Monitoring (BSM)]

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

DTC CHART

DTC No.

Description

Page

B118C 11⁽¹⁾

Short to ground in BSM indicator light (LH) circuit

See DTC B118C:11 [BLIND SPOT MONITORING (BSM)] .

B118C 15⁽¹⁾

Short to battery or open circuit in BSM indicator light (LH) circuit

See DTC B118C:15 [BLIND SPOT MONITORING (BSM)] .

B118D.11⁽²⁾

Short to ground in BSM indicator light (RH) circuit

See DTC B118D:11 [BLIND SPOT MONITORING (BSM)] .

B118D15⁽²⁾

Short to power supply or open circuit in BSM indicator light (RH) circuit

See DTC B118D:15 [BLIND SPOT MONITORING (BSM)] )

U0001 88

CAN system communication error

See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .

U0100:00

Communication error to PCM

U010100⁽³⁾

Communication error to TCM

U0140:00

Communication error to BCM

U0232:00⁽²⁾

BSM control module (LH) communication error

U0233 00⁽¹⁾

BSM control module (RH) communication error

U0401:68

Error signal from PCM

U0402:68⁽³⁾

Error signal from TCM

U0422 68

Error signal from BCM

U0533:68⁽²⁾

Error signal from BSM control module (LH)

U0534:68⁽¹⁾

Error signal from BSM control module (RH)

U3000 01

Internal electrical malfunction in BSM control module

See DTC U300001 [BLIND SPOT MONITORING (BSM)] .

U3000 09

Internal malfunction of BSM control module

See DTC U3000:09 [BLIND SPOT MONITORING (BSM)] .

U3000.4A

BSM control module assembly abnormality

See DTC U3000 4A [BLIND SPOT MONITORING (BSM)] .

U3000 97

Radar performance malfunction

See DTC U3000:97 [BLIND SPOT MONITORING (BSM)] .

U3003.16

BSM control module power supply voltage decreases (less than 9 V)

See DTC U3003:16/ U300317 [BLIND SPOT MONITORING (BSM)] )

U3003 17

BSM control module power supply voltage increases (more than 16 V)

⁽¹⁾	BSM control module (LH) only

⁽²⁾	BSM control module (RH) only

⁽³⁾

ATX