LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 624 (Seat Belt System) >> Seat Belt Inspection >> ELR

Seat Belt Inspection: ELR

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the belt can be pulled out smoothly, and that it retracts smoothly.
    • If there is any malfunction, replace the seat belt.
  2. Verify that the retractor locks when the belt is pulled quickly
    • If there is any malfunction, replace the seat belt.
  3. Remove the retractor.
    Fig 1: Checking Retractor Locks
    G06206100Courtesy of MAZDA MOTORS CORP.
  4. While pulling the seat belt out, make sure that the seat belt does not lock when the retractor is tilted slowly up to 15° from the mounted position and locks when the retractor is tilted 40° or more. 
    • If there is any malfunction, replace the seat belt
      Fig 2: Identifying Retractor Angle
      G06206101Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals