LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 624 (Seat Belt System) >> Child-Restraint Seat Anchor Removal/Installation

Child-Restraint Seat Anchor Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover.
  2. Remove the bolt and child-restraint seat anchor.
  3. Install in the reverse order of removal.
    Fig 1: Bolt And Child-Restraint Seat Anchor With Torque Specifications
    G06206109Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals