DTC Table
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | System malfunction location | Reference | |||
|---|---|---|---|---|---|
| M-MDS menu | Air bag system warning light | ||||
| Flashing pattern | Priority ranking | ||||
| B0001:11 | 19 | 15 | Driver-side air bag module (inflator No 1) circuit short to body ground | (See DTC B0001:11/B0001:12/B0001:19/B0001:1A/B0001:1B .) | |
| B0001:12 | Driver-side air bag module (inflator No 1) circuit short to power supply | ||||
| B0001:19 | Short to the driver-side air bag module (inflator No 1) circuit and other air bag module circuits | ||||
| B0001:1A | Driver-side air bag module (inflator No 1) circuit resistance low | ||||
| B0001:1B | Driver-side air bag module (inflator No. 1) circuit resistance high | ||||
| B0001:55 | Configuration setting error (driver-side air bag module (inflator No. 1) structural malfunction) | (See DTC B0001:55/B0010:55 .) | |||
| B0002:11 | 19 | 15 | Driver-side air bag module (inflator No. 2) circuit short to body ground | (See DTC B0002:11/B0002:12/B0002:1A/B0002:1B .) | |
| B0002:12 | Driver-side air bag module (inflator No 2) circuit short to power supply | ||||
| B0002:1A | Driver-side air bag module (inflator No. 2) circuit resistance low | ||||
| B0002:1B | Driver-side air bag module (inflator No. 2) circuit resistance high | ||||
| B0002:55 | Configuration setting error (driver-side air bag module (inflator No 2) structural malfunction) | (See DTC B0002:55/B0011:55 ) | |||
| B0010:11 | 21 | 14 | Passenger-side air bag module (inflator No 1) circuit short to body ground | (See DTC B0010:11/B0010:12/B0010:19/B0010:1A/B0010:1B .) | |
| B0010:12 | Passenger-side air bag module (inflator No. 1) circuit short to power supply | ||||
| B0010:19 | Short to the passenger-side air bag module (inflator No. 1) and other air bag module circuits | ||||
| B0010:1A | Passenger-side air bag module (inflator No 1) circuit resistance low | ||||
| B0010:1B | Passenger-side air bag module (inflator No 1) circuit resistance high | ||||
| B0010:55 | Configuration setting error (passenger-side air bag module (inflator No. 1) structural malfunction) | (See DTC B0001:55/B0010:55 .) | |||
| B0011:11 | 21 | 14 | Passenger-side air bag module (inflator No. 2) circuit short to body ground | (See DTC B0011:11/B0011:12/B0011:19/B0011:1A/B0011:1B .) | |
| B0011:12 | Passenger-side air bag module (inflator No. 2) circuit short to power supply | ||||
| B0011:19 | Short to the passenger-side air bag module (inflator No. 2) and other air bag module circuits | ||||
| B0011:1A | Passenger-side air bag module (inflator No. 2) circuit resistance low | ||||
| B0011:1B | Passenger-side air bag module (inflator No. 2) circuit resistance high | ||||
| B0011:55 | Configuration setting error (passenger-side air bag module (inflator No. 2) structural malfunction) | (See DTC B0002:55/B0011:55 .) | |||
| B0070:11 | 38 | 17 | Driver-side pre-tensioner seat belt circuit short to body ground | (See DTC B0070:11/B0070:12/B0070:19/B0070:1A/B0070:1B .) | |
| B0070:12 | Driver-side pre-tensioner seat belt circuit short to power supply | ||||
| B0070.1A | Driver-side pre-tensioner seat belt circuit resistance low | ||||
| B0070.1B | Driver-side pre-tensioner seat belt circuit resistance high | ||||
| B0070:55 | Configuration setting error (driver-side pre-tensioner seat belt structural malfunction) | (See DTC B0070:55/B0072:55 .) | |||
| B0072-11 | 39 | 16 | Passenger-side pre-tensioner seat belt circuit short to body ground | (See DTC B0072:11/B0072:12/B0072:19/B0072:1A/B0072:1B ) | |
| B0072:12 | Passenger-side pre-tensioner seat belt circuit short to power supply | ||||
| B0072:19 | Short to passenger-side pre-tensioner seat belt circuit and other air bag module circuits | ||||
| B0072:1A | Passenger-side pre-tensioner seat belt circuit resistance low | ||||
| B0072.1B | Passenger-side pre-tensioner seat belt circuit resistance high | ||||
| B0072:55 | Configuration setting error (passenger-side pre-tensioner seat belt structural malfunction) | (See DTC B0070:55/B0072:55 .) | |||
| B0094:11 | 42 | 9 | Crash zone sensor circuit short to body ground | (See DTC B0094:11/B0094:12/B0094:87/B0094:96 .) | |
| B0094:12 | Crash zone sensor circuit short to power supply or open line | ||||
| B0094:55 | Configuration setting error (crash zone sensor structural malfunction) | (See DTC B0094:55 ) | |||
| B0094:87 | No response from crash zone sensor | (See DTC B0094:11/B0094:12/B0094:87/B0094:96 ) | |||
| B0094:96 | Crash zone sensor internal malfunction | ||||
| B00A0:09 | 16 | 22 | Seat weight sensor control module internal malfunction | (See DTC B00A0:09 .) | |
| B00A0:28 | 16 | Seat weight sensor calibration setting invalid | (See DTC B00A0:28 .) | ||
| B00A0.4A | 15 | 6 | Seat weight sensor ID mismatch | (See DTC B00A0:4A ) | |
| B00A0:54 | 16 | 22 | Seat weight sensor calibration setting not set | (See DTC B00A0:54 ) | |
| B00A0:81 | Invalid signal to SAS control module | (See DTC B00A0:81/B00A0:87/B00A0:8F ) | |||
| B00A0:87 | Error signal from seat weight sensor control module | ||||
| B00A0.8F | Seat weight sensor communication error | ||||
| B00B5:11 | 49 | 24 | Seat track position sensor circuit short to body ground | (See DTC B00B5:11/B00B5:12/B00B5:13/B00B5:1E .) | |
| B00B5:12 | Seat track position sensor circuit short to power supply or open line | ||||
| B00B5:13 | Seat track position sensor circuit open | ||||
| B00B5.1E | Seat track position sensor circuit resistance not within specification | ||||
| B00B5:55 | Configuration setting error (seat track position sensor structural malfunction) | (See DTC B00B5:55 .) | |||
| B00C1:93 | 16 | Seat weight sensor (LH) communication error | (See DTC B00C1:93 ) | ||
| B00C2:93 | 16 | Seat weight sensor (RH) communication error | (See DTC B00C2:93 .) | ||
| B00D2:01 | 14 | 5 | Air bag system warning light malfunction | (See DTC B00D2:01 .) | |
| B00D2:29 | Invalid signal to air bag system warning light | (See DTC B00D2:29 .) | |||
| B00D5:11 | 18 | 23 | PAD indicator circuit short to body ground | (See DTC B00D5:11/B00D5:12 .) | |
| B00D5:12 | PAD indicator circuit short to power supply | ||||
| B00D5:55 | Configuration setting error (PAD indicator structural malfunction) | (See DTC B00D5:55 .) | |||
| B1011:95 | 58 | 8 | SAS control module connector poor connection | (See DTC B1011:95 ) | |
| B10FD:11 | 43 | 11 | Driver-side side air bag sensor No. 1 circuit short to body ground | (See DTC B10FD:11/B10FD:12/B10FD:87/B10FD:96 .) | |
| B10FD:12 | Driver-side side air bag sensor No 1 circuit short to power supply or open line | ||||
| B10FD:55 | Configuration setting error (driver-side side air bag sensor No. 1 structural malfunction) | (See DTC B10FD:55/B10FE:55 .) | |||
| B10FD:87 | No response from driver-side side air bag sensor No 1 | (See DTC B10FD:11/B10FD:12/B10FD:87/B10FD:96 ) | |||
| B10FD:96 | Driver-side side air bag sensor No 1 internal malfunction | ||||
| B10FE:11 | 44 | 10 | Passenger-side side air bag sensor No. 1 short to body ground | (See DTC B10FE:11/B10FE:12/B10FE:87/B10FE:96 .) | |
| B10FE:12 | Passenger-side side air bag sensor No. 1 circuit short to power supply or open line | ||||
| B10FE:55 | Configuration setting error (passenger-side side air bag sensor No 1 structural malfunction) | (See DTC B10FD:55/B10FE:55 .) | |||
| B10FE:87 | No response from passenger-side side air bag sensor No 1 | (See DTC B10FE:11/B10FE:12/B10FE:87/B10FE:96 ) | |||
| B10FE:96 | Passenger-side side air bag sensor No 1 internal malfunction | ||||
| B1126:11 | 22 | 19 | Driver-side side air bag module circuit short to body ground | (See DTC B1126:11/B1126:12/B1126:19/B1126:1A/B1126:1B .) | |
| B1126:12 | Driver-side side air bag module circuit short to power supply | ||||
| B1126:19 | Short circuit to driver-side side air bag module and other air bag module circuits | ||||
| B1126:1A | Driver-side side air bag module circuit resistance low | ||||
| B1126:1B | Driver-side side air bag module circuit resistance high | ||||
| B1126:55 | Configuration setting error (driver-side side air bag module structural malfunction) | (See DTC B1126:55/B1127:55 .) | |||
| B1127:11 | 23 | 18 | Passenger-side side air bag module circuit short to body ground | (See DTC B1127:11/B1127:12/B1127:19/B1127:1A/B1127:1B .) | |
| B1127:12 | Passenger-side side air bag module circuit short to power supply | ||||
| B1127:19 | Short to passenger-side side air bag module and other air bag module circuits. | ||||
| B1127:1A | Passenger-side side air bag module circuit resistance low | ||||
| B1127:1B | Passenger-side side air bag module circuit resistance high | ||||
| B1127:55 | Configuration setting error (passenger-side side air bag module structural malfunction) | (See DTC B1126:55/B1127:55 .) | |||
| B1128:11 | 24 | 21 | Driver-side curtain air bag module circuit short to body ground | (See DTC B1128:11/B1128:12/B1128:19/B1128:1A/B1128:1B .) | |
| B1128:12 | Driver-side curtain air bag module circuit short to power supply | ||||
| B1128:19 | Driver-side curtain air bag module and other air bag module circuits short | ||||
| B1128:1A | Driver-side curtain air bag module circuit resistance low | ||||
| B1128.1B | Driver-side curtain air bag module circuit resistance high | ||||
| B1128:55 | Configuration setting error (driver-side curtain air bag module structural malfunction) | (See DTC B1128:55/B1129:55 .) | |||
| B1129:11 | 25 | 20 | Passenger-side curtain air bag module circuit short to body ground | (See DTC B1129:11/B1129:12/B1129:19/B1129:1A/B1129:1B .) | |
| B1129:12 | Passenger-side curtain air bag module circuit short to power supply | ||||
| B1129:19 | Short to passenger-side curtain air bag module and other air bag module circuits. | ||||
| B1129:1A | Passenger-side curtain air bag module circuit resistance low | ||||
| B1129:1B | Passenger-side curtain air bag module circuit resistance high | ||||
| B1129:55 | Configuration setting error (passenger-side curtain air bag module structural malfunction) | (See DTC B1128:55/B1129:55 .) | |||
| B1193:00 | 13 | 3 | SAS control module operation (deployment) | (See DTC B1193:00 ) | |
| B1196:11 | 45 | 13 | Driver-side side air bag sensor No. 2 circuit short to body ground | (See DTC B1196:11/B1196:12/B1196:87/B1196:96 .) | |
| B1196:12 | Driver-side side air bag sensor No. 2 circuit short to power supply or open line | ||||
| B1196:55 | Configuration setting error (driver-side side air bag sensor No. 2 structural malfunction) | (See DTC B1196:55/B1197:55 .) | |||
| B1196:87 | No response from driver-side side air bag sensor No. 2 | (See DTC B1196:11/B1196:12/B1196:87/B1196:96 ) | |||
| B1196:96 | Driver-side side air bag sensor No 2 internal malfunction | ||||
| B1197:11 | 46 | 12 | Passenger-side side air bag sensor No. 2 short to body ground | (See DTC B1197:11/B1197:12/B1197:87/B1197:96 .) | |
| B1197:12 | Passenger-side side air bag sensor No. 2 circuit short to power supply or open line | ||||
| B1197:55 | Configuration setting error (passenger-side side air bag sensor No. 2 structural malfunction) | (See DTC B1196:55/B1197:55 .) | |||
| B1197:87 | No response from passenger-side side air bag sensor No 2 | (See DTC B1197:11/B1197:12/B1197:87/B1197:96 .) | |||
| B1197:96 | Passenger-side side air bag sensor No. 2 internal malfunction | ||||
| U0001:88 | 14 | 5 | CAN communication error | (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .) | |
| U0155:00 | Instrument cluster communication error | ||||
| U0300:00 | 54 | 7 | Configuration setting invalid | (See DTC U0300:00/U2100:00 .) | |
| U2100:00 | - | Flashing | 4 | No configuration (Module B & A mode) | |
| U3000:04 | 12 | 2 | SAS control module internal malfunction | (See DTC U3000:04/U3000:1C/U3000:29/U3000:42/U3000:47 ) | |
| U3000.1C | SAS control module circuit voltage value out of range | ||||
| U3000:29 | Central sensor in control module malfunction | ||||
| U3000:42 | 12 | 2 | SAS control module memory malfunction | ||
| - | Continuously illuminated | 1 | |||
| U3000:47 | 12 | 2 | SAS control module internal control malfunction | ||
| U3003:16 | - | Continuously illuminated | 1 | SAS control module power supply voltage decreases (less than 8 V) . | (See DTC U3003:16/U3003:17 .) |
| U3003:17 | SAS control module power supply voltage increases (16.1 V or more) | ||||