Detection Condition
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Abnormal resistance (other than 1.5-4.1 ohms) detected in the passenger-side air bag module (inflator No. 2) circuit
- Malfunction in the wiring harness between the passenger-side air bag module (inflator No. 2) and SAS control module