LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 619 (Parking Brake System) >> Parking Brake Switch Inspection

Parking Brake Switch Inspection

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the parking brake switch connector.
    Fig 1: Identifying Parking Brake Switch Connector
    G06205555Courtesy of MAZDA MOTORS CORP.
  2. Verify that the continuity is as indicated in the table.
    • If not as indicated in the table, replace the parking brake lever.
      Fig 2: Parking Brake Switch Connector Terminals Continuity Chart
      G06205554Courtesy of MAZDA MOTORS CORP.