Stroke Inspection
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Pull the parking brake lever two to three times.
- Inspect the parking brake stroke by slowly pulling at point A 50 mm {2.0 in}
from the end of the parking brake lever with a force of 98 N {10 kgf, 22 lbf}
and counting the number of notches (clicking sound).
- If not within the specification, adjust the parking brake lever.
Parking brake lever stroke when pulled at 98 N {10 kgf, 22 lbf}
2-4 notches
- If not within the specification, adjust the parking brake lever.