LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 617 (Rear Axle) >> Wheel Hub Component Inspection >> Wheel Bearing Excessive Play Inspection

Wheel Bearing Excessive Play Inspection

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the magnetic base and dial gauge as shown in the figure and measure the wheel bearing axial excessive play.
    • If it exceeds the maximum specification, replace the wheel hub component.

      Maximum rear wheel bearing play 

      0.05 mm {0.002 in} 

      Fig 1: Measuring Wheel Bearing Axial Play
      G06205455Courtesy of MAZDA MOTORS CORP.