Dust Cover Disassembly Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The dust cover does not need to be removed unless it is being replaced.

Mark the dust cover and steering knuckle for proper installation.

Fig 1: Identifying Dust Cover And Steering Knuckle Installation Mark
Courtesy of MAZDA MOTORS CORP.
Remove the dust cover using a chisel.

Fig 2: Removing Dust Cover Using Chisel
Courtesy of MAZDA MOTORS CORP.