PID/DATA Monitor Table
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- When the wheel unit is in sleep mode, the data logger displays a value different from the actual value. (Such as, WU1_P: 0 KPa, WU1_T: -50°C)
PID/DATA MONITOR CHART
| PID Name (Definition) | Unit/Condition | Condition/Specification | Action |
|---|---|---|---|
| WU1_ID WU2_ID WU3_ID WU4_ID (Wheel unit ID code) |
- | Indicates the registered ID that is transmitted from the wheel unit |
|
| WU1_P WU2_P WU3_P WU4_P (Tire pressure) |
Pa, psi | Indicates the tire pressure See WHEEL AND TIRE SPECIFICATION . |
|
| WU1_T WU2_T WU3_T WU4_T (Tire temperature) |
°C, °F | Indicates the internal tire air temperature | Adjust tire pressure See TIRE PRESSURE ADJUSTMENT (WITH TPMS) . |
| WU1_VPWR WU2_VPWR WU3_VPWR WU4_VPWR (Supply voltage) |
Normal/Error | Signal is Normal Signal is abnormal: Error | Replace the wheel unit See WHEEL UNIT REMOVAL/INSTALLATION . |
| WU1_ERR_T WU2_ERR_T WU3_ERR_T WU4_ERR_T (Tire temperature) |
Normal/Error | Signal is normal. Normal Signal is abnormal: Error | Replace the wheel unit See WHEEL UNIT REMOVAL/INSTALLATION . |
| WU1_ERR_P WU2_ERR_P WU3_ERR_P WU4_ERR_P (Tire pressure) |
Normal/Error | Signal is normal. Normal Signal is abnormal: Error | Replace the wheel unit See WHEEL UNIT REMOVAL/INSTALLATION ) |