LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (Air Bag System) >> Seat Track Position Sensor Removal/Installation

Seat Track Position Sensor Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch the ignition to off
  2. Disconnect the negative battery cable and wait for 1 min or more  .
  3. Remove the connector
    4. Fig 1: Identifying Seat Track Position Sensor, Connector & Bolt
    G06200449Courtesy of MAZDA MOTORS CORP.
  4. Remove the bolt.
  5. Remove the seat track position sensor.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals