LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (Air Bag System) >> Air Bag Module And Pre-TENSIONER Seat Belt Deployment Procedures >> Deployment Procedure for Outside of Vehicle >> Notes

Deployment Procedure for Outside of Vehicle: Notes

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the SST (Deployment tool)  (See INSPECTION OF SST (DEPLOYMENT TOOL) .)
  2. Switch the ignition to off
  3. Disconnect the negative battery cable and wait for 1 min or more  .
  4. Follow the procedure below for operating (deploying) the applicable air bag module or pre-tensioner seat belt.
scientia non olet · About LEMON Manuals