Crossmember Component Removal Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Removing the crossmember component is dangerous. The crossmember component could fall and cause serious injury or death. Verify that the jack securely supports the crossmember component.

Loosen the rear upper arm inner side.
Remove the rear upper arm outer side.
Support the crossmember component using a jack and remove the nuts.
Remove the crossmember component.

Fig 1: Supporting Crossmember Component Using Jack
Courtesy of MAZDA MOTORS CORP.