Front Tilt Motor Inspection

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the front tilt motor connector.

Apply battery positive voltage to the front tilt motor terminals and inspect the front tilt motor operation.

If not as specified, replace the front tilt motor.

FRONT TILT MOTOR OPERATION CONDITIONS

Motor operation	Connection
Motor operation	B+	GND
Up	D	B
Down	B	D

Fig 1: Inspecting Front Tilt Motor

Courtesy of MAZDA MOTORS CORP.