LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 603 (Body System [Body Panels]) >> Trunk Lid Stay Damper Disposal

Trunk Lid Stay Damper Disposal

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The gas in the trunk lid stay damper is colorless, odorless, and non-toxic.
  1. Wear protective eye wear.
  2. Lay the stay damper flat.
  3. Saw through the trunk lid stay damper body using a hacksaw.
  4. Allow the gas to escape from the trunk lid stay damper.
  5. Discard the trunk lid stay damper.
    Fig 1: Discarding Trunk Lid Stay Damper
    G06200663Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals