Rear Bumper Disassembly/Assembly: Notes
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Vehicles with BSM system
- Sticking reflecting objects such as stickers.
- Dust and dirt
- Sticking metals
- Applying putty
- The following acts are prohibited in order to prevent the improper reflections of the Blind Spot Monitoring Radar.
- Sticking objects including stickers on the surface of the rear bumper
- Applying putty to the surface of the rear bumper
- Keep the surface of the rear bumper clean. Dust and dirt may interfere with the proper reflections of the Blind Spot Monitoring Radar, which may cause malfunction.