TR Switch Inspection
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the starter operates only when the ignition is switched to the START with the selector lever in P or N position.
- Verify that the back-up lights illuminate when shifted to R position with the ignition at ON.
- Verify that the positions of the selector lever and the selector indicator light correspond.
- If there is any malfunction, perform the "Neutral Position Learning". (See TCM REMOVAL/INSTALLATION [AW6A-EL] .)