Torque Converter Nuts Removal Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cover as shown in the figure.

Fig 1: Identifying Torque Converter Nuts & Cover
Courtesy of MAZDA MOTORS CORP.
Hold the crankshaft pulley to prevent drive plate from rotating.

Fig 2: Holding Crankshaft Pulley
Courtesy of MAZDA MOTORS CORP.
Remove the torque converter nuts.

Fig 3: Identifying Torque Converter Nuts

Courtesy of MAZDA MOTORS CORP.