LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 601 (Front Suspension System) >> Front Upper Arm Removal/Installation >> Front Upper Arm Removal Note

Front Upper Arm Removal Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Pull the front shock absorber and coil spring outward of the vehicle when doing the procedure so as to assure a space for the front upper arm bolt removal.
  1. Remove the nuts from the upper part of the front shock absorber.
  2. Pull the front shock absorber and coil spring out of the way, towards the outer side of the vehicle.
  3. Remove the bolts.
  4. Remove the front upper arm.
    Fig 1: View Of Front Upper Arm Removal
    G06199921Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals