Damper Fork Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Check the identification mark to verify if the part is for the left or right side

Fig 1: Identifying Damper Fork Identification Mark
Courtesy of MAZDA MOTORS CORP.
Set the front shock absorber bracket against the damper fork.

Fig 2: Identifying Front Shock Absorber Bracket
Courtesy of MAZDA MOTORS CORP.
Install the bolt aligned with the front shock absorber notch.
Tighten the bolt to the specified torque and install the damper fork.

Fig 3: Aligning Bolt With Front Shock Absorber Notch
Courtesy of MAZDA MOTORS CORP.